Ericsson · Radio Units & RRUs
Ericsson Radio 2242 B1 B3 — KRC161726/1
- Part number
- KRC161726/1Model Radio 2242 B1 B3
- Manufacturer
- Ericsson
The Radio 2242 carries Band 1 and Band 3 simultaneously on one unit. Its 2 × 80 W is a single power budget shared dynamically between the two bands, which is the specification most often misread when sizing a two-band site off “two radios” arithmetic.
Specifications
| Product number | KRC 161 726/1 | Corroborated |
|---|---|---|
| Frequency | Band 1: UL 1920–1980 / DL 2110–2170 MHz. Band 3: UL 1710–1785 / DL 1805–1880 MHz | Manufacturer |
| Configuration | 2T2R, 2 antenna ports. 4T4R only by pairing two units | Manufacturer |
| Output power | Up to 2 × 80 W, dynamically shared between B1 and B3 | Manufacturer |
| Technologies | GSM, WCDMA, LTE, CAT-M, NB-IoT | Manufacturer |
| Instantaneous bandwidth | 75 MHz on B3 and 60 MHz on B1, simultaneously | Manufacturer |
| Carrier capacity | GSM 4 DL / 8 UL per port; WCDMA 6 DL / 12 UL; LTE 6 per port | Manufacturer |
| CPRI | 2 ports at 2.5 / 4.9 / 9.8 / 10.1 Gbit/s | Manufacturer |
| Baseband distance | Up to 40 km, cascade or star | Manufacturer |
Source: Ericsson Radio 2242 datasheet and Radio Capabilities document.
Before you order
The 2 × 80 W is shared across both bands, not per band. Sizing a two-band site as though each band has its own 80 W will over-estimate available power.
Equipment condition
New — factory-sealed, supplied through the manufacturer's own channel or a qualified distributor, with full manufacturer warranty.
New surplus — unused factory stock, original packaging where available, sourced from decommissioned projects or distributor inventory. Manufacturer warranty may have lapsed; CRS PLUS warranty applies.
Refurbished / tested — previously deployed equipment, cleaned, firmware-checked and functionally tested against the manufacturer's specification before shipment. CRS PLUS warranty applies.
Condition is confirmed in writing on every quotation before you commit to an order.
Warranty
Warranty terms vary by item, by condition and by the supplier the equipment is sourced from. They are stated in writing on the quotation, per line item, before you commit to an order.
Where equipment is supplied new through the manufacturer's own channel, the manufacturer's warranty applies and is passed to you.
Send us the part numbers you need and we will confirm warranty terms alongside availability, condition, lead time and price.
Related pages
Manufacturer names, product names and part numbers are the property of their respective owners and are used here for identification purposes only. CRS PLUS sources these products through its qualified supplier base and holds no distributor, reseller or agency appointment from any manufacturer listed.
Request a quotation for KRC161726/1
A structured offer follows within 72 hours.