Digitus · Cables, Connectors & Fibre
Digitus E2000 to LC fibre optic patch cord
Digitus is a brand of the German manufacturer Assmann Electronic GmbH, supplying structured cabling, patch cords and general networking accessories. This item is a duplex singlemode fibre patch cord terminated E2000 (8-degree APC) at one end and LC (UPC) at the other, a common combination for linking equipment fitted with angled E2000 ports to LC-terminated patch panels or transceivers.
How to read these part numbers
E2000 (APC) and LC (UPC) are different connector families with different fibre-end polish types — APC (angled) gives lower back-reflection than UPC (flat) and the two should not be mixed with an incompatible polish at either end. Based on the part number's length-code convention within this product line, this cord is supplied at approximately 10 metres; confirm the length you need before ordering.
Catalogue
Equipment reference
| Part Number | Model / Designation | Compatibility | Band / Interface | Condition | Lead Time | Quote |
|---|---|---|---|---|---|---|
| AL-9E2000LC-10I | Digitus fibre optic patch cord, E2000 (APC) to LC (UPC) | Singlemode OS2 fibre links between E2000 and LC connector interfaces | Duplex, E2000 (8-degree APC) to LC (UPC), singlemode OS2 9/125µm fibre, approx. 10m | On enquiry | On enquiry |
Cannot find a part number? Send us the number and we will identify and price it.
Ordering notes
Confirm the exact length, connector polish (APC/UPC) at each end, and simplex or duplex configuration required — this part number series covers multiple lengths under closely related codes. Condition is stated per quotation as new or tested refurbished/pulled stock. Destination import requirements for passive cabling are typically lighter than for active equipment, but we will confirm any destination-specific requirement on the quotation.
Lifecycle and availability
Digitus is Assmann Electronic's current, actively produced networking and cabling brand; this patch cord is a standard catalogue item within its fibre optic patch cord range.
Equipment condition
New — factory-sealed, supplied through the manufacturer's own channel or a qualified distributor, with full manufacturer warranty.
New surplus — unused factory stock, original packaging where available, sourced from decommissioned projects or distributor inventory. Manufacturer warranty may have lapsed; CRS PLUS warranty applies.
Refurbished / tested — previously deployed equipment, cleaned, firmware-checked and functionally tested against the manufacturer's specification before shipment. CRS PLUS warranty applies.
Condition is confirmed in writing on every quotation before you commit to an order.
Warranty
Warranty terms vary by item, by condition and by the supplier the equipment is sourced from. They are stated in writing on the quotation, per line item, before you commit to an order.
Where equipment is supplied new through the manufacturer's own channel, the manufacturer's warranty applies and is passed to you.
Send us the part numbers you need and we will confirm warranty terms alongside availability, condition, lead time and price.
Questions
Frequently asked questions
Can I mix APC and UPC connectors on the same cord?
This cord is built for E2000 APC at one end and LC UPC at the other by design, matching common port types across telecom and data centre equipment. Do not substitute a UPC connector for an APC port or vice versa — the polish types are not compatible and mixing them adds significant back-reflection and insertion loss.
What length is this patch cord?
Based on the part number's length-code convention within the Digitus range, this is approximately a 10-metre cord. Confirm the exact length with us before ordering, as the same base part number covers multiple lengths.
Is a used fibre patch cord safe to reuse?
Yes, provided it is tested. We test continuity and connector condition on refurbished or pulled cable stock before it is offered, and state condition on every quotation.
Related pages
Manufacturer names, product names and part numbers are the property of their respective owners and are used here for identification purposes only. CRS PLUS sources these products through its qualified supplier base and holds no distributor, reseller or agency appointment from any manufacturer listed.
This catalogue is compiled from our supplier network's available inventory and from manufacturer product documentation, and is reviewed monthly. Listing does not indicate stock held by CRS PLUS — availability, condition and lead time are confirmed per enquiry. Last reviewed: 22 August 2026.
Need a part number from Cables, Connectors & Fibre?
A structured offer follows within 72 hours.