Generic / to specification · Cables, Connectors & Fibre
Fibre patch cords, pigtails and connectors
Passive fibre is where FTTH and transport projects actually spend most of their line items: not the OLT, but the thousands of patch cords, splitters, terminals and closures between it and the subscriber. None of it carries a manufacturer's part number that matters, which is why buyers describe it by specification rather than brand and why this page is organised that way. We source these to specification, in project quantities, with samples where a project needs them approved first.
How to read these part numbers
Read a patch cord as connector-end / connector-end / fibre type / simplex or duplex / length. SC/APC — angled, green — is the GPON and FTTH standard; LC/UPC — flat, blue — is what SFP ports take; mixing them costs 0.5 dB and a return loss problem. G.657A1 and A2 are bend-insensitive singlemode grades used in access; G.652D is the transport grade; OM3 and OM4 are multimode grades for 10G and 40G/100G short reach. PLC splitters are described by split ratio, then by packaging: bare, connectorised, LGX cassette or rack. ODFs, FATs and FDTs are described by fibre count and mounting. Closures are dome or inline, by fibre capacity.
Catalogue
Equipment reference
| Part Number | Model / Designation | Compatibility | Band / Interface | Condition | Lead Time | Quote |
|---|---|---|---|---|---|---|
| ADSS 24F | ADSS aerial cable, 24 fibre | Aerial backbone / access | G.652D, all-dielectric self-supporting, 100–200 m span (12 / 48 / 96 fibre on request) | On enquiry | On enquiry | |
| CLOSURE DOME 144 | Dome splice closure, 144 core | Aerial / duct / direct buried | 144 fibres, IP68, mechanical seal | On enquiry | On enquiry | |
| CLOSURE DOME 288 | Dome splice closure, 288 core | Backbone / duct | 288 fibres, IP68, mechanical seal | On enquiry | On enquiry | |
| CLOSURE DOME 48 | Dome splice closure, 48 core | Aerial / duct / direct buried | 48 fibres, 4 round ports + 1 oval, IP68, mechanical seal | On enquiry | On enquiry | |
| CLOSURE DOME 96 | Dome splice closure, 96 core | Aerial / duct / direct buried | 96 fibres, IP68, mechanical seal | On enquiry | On enquiry | |
| CLOSURE INLINE 96 | Inline (horizontal) splice closure, 96 core | Aerial / duct | 96 fibres, inline, IP68 | On enquiry | On enquiry | |
| DROP CABLE 1C G657A2 1KM | FTTH drop cable, 1 core, G.657A2, 1 km | FTTH last drop | Flat 2 × 3 mm, FRP strength members, LSZH, 1 km drum (2-core on request) | On enquiry | On enquiry | |
| DROP CABLE 1C SELF-SUPPORT 1KM | FTTH self-supporting drop cable, 1 core, 1 km | Aerial FTTH drop | Flat 2 × 5.2 mm with steel messenger, G.657A2, 1 km drum | On enquiry | On enquiry | |
| FAST CONNECTOR SC/APC | Field-installable fast connector, SC/APC | FTTH drop termination | SC/APC, pre-embedded fibre, for 2 × 3 mm / 2 × 5 mm drop cable | On enquiry | On enquiry | |
| FAT 16 | Fibre access terminal, 16 core, IP65 | GPON ODN, pole / wall | 16 × SC/APC drop ports, 1:16 splitter slot, IP65 | On enquiry | On enquiry | |
| FAT 8 | Fibre access terminal, 8 core, IP65 | GPON ODN, pole / wall | 8 × SC/APC drop ports, 1:8 splitter slot, IP65 | On enquiry | On enquiry | |
| FDT 144 | Fibre distribution terminal, 144 core | GPON ODN, wall / pole | 144-fibre splice and distribution, splitter trays | On enquiry | On enquiry | |
| FDT 48 | Fibre distribution terminal, 48 core | GPON ODN, wall / pole | 48-fibre splice and distribution, splitter tray | On enquiry | On enquiry | |
| FDT 96 | Fibre distribution terminal, 96 core | GPON ODN, wall / pole | 96-fibre splice and distribution, up to 4 × 1:16 splitters | On enquiry | On enquiry | |
| GYFTY 48F | Non-metallic duct cable, 48 fibre | Duct / backbone | G.652D, loose tube, FRP central member (24 / 96 / 144 fibre on request) | On enquiry | On enquiry | |
| GYTS 96F | Armoured duct / direct-buried cable, 96 fibre | Duct / direct buried | G.652D, steel-tape armour, loose tube (24–288 fibre on request) | On enquiry | On enquiry | |
| LC-LC OM3 DX 3M | Multimode patch cord, LC – LC, OM3, duplex, 3 m | 10G-SR / 40G-SR4 breakout | OM3 50/125 µm, aqua, LSZH, duplex (1–30 m on request) | On enquiry | On enquiry | |
| LC-LC OM4 DX 3M | Multimode patch cord, LC – LC, OM4, duplex, 3 m | 10G / 25G / 100G-SR | OM4 50/125 µm, violet / aqua, LSZH, duplex (1–30 m on request) | On enquiry | On enquiry | |
| LC/UPC PIGTAIL SM 1.5M | Singlemode pigtail, LC/UPC, 1.5 m, 12-colour set | ODF / splice trays | G.652D SM, 0.9 mm tight buffer, 12 colours per set | On enquiry | On enquiry | |
| LC/UPC-LC/UPC SM DX 3M | Singlemode patch cord, LC/UPC – LC/UPC, duplex, 3 m | SFP / SFP+ / QSFP LC ports | G.652D SM, 2.0 mm LSZH, duplex, uniboot available (other lengths on request) | On enquiry | On enquiry | |
| LC/UPC-LC/UPC SM DX 3M ARMOURED | Armoured singlemode patch cord, LC – LC, duplex, 3 m | Outdoor cabinets, RRU / BBU jumpers | G.657A2 SM, stainless-steel armour, LSZH, duplex | On enquiry | On enquiry | |
| LC/UPC-SC/UPC SM DX 3M | Singlemode patch cord, LC/UPC – SC/UPC, duplex, 3 m | SFP ports to SC ODF | G.652D SM, 2.0 mm LSZH, duplex | On enquiry | On enquiry | |
| MPO-12 OM4 TRUNK 10M | MPO/MTP-12 to MPO/MTP-12 trunk, OM4, 10 m | 40G-SR4 / 100G-SR4 | 12-fibre OM4, female–female, Type B polarity (20 m, 30 m, 50 m on request) | On enquiry | On enquiry | |
| MPO-LC OM4 BREAKOUT 3M | MPO/MTP-12 to 4 × LC duplex breakout, OM4, 3 m | 40G to 4 × 10G / 100G to 4 × 25G | 8-fibre OM4, MPO female to 4 × LC duplex | On enquiry | On enquiry | |
| ODF 144 SC/APC | Optical distribution frame, 144-port SC/APC | OLT / transport racks | 19-inch, 144 SC/APC adaptors (LC duplex and SC/UPC variants on request) | On enquiry | On enquiry | |
| ODF 24 SC/APC 1U | Optical distribution frame, 24-port SC/APC, 1U rack | OLT / transport racks | 19-inch 1U, 24 SC/APC adaptors, pigtails and splice tray included | On enquiry | On enquiry | |
| ODF 48 LC DX 1U | Optical distribution frame, 48-fibre LC duplex, 1U rack | Transport / data-centre racks | 19-inch 1U, 24 LC duplex adaptors, SM or OM4 | On enquiry | On enquiry | |
| ODF 48 SC/APC 2U | Optical distribution frame, 48-port SC/APC, 2U rack | OLT / transport racks | 19-inch 2U, 48 SC/APC adaptors, sliding drawer | On enquiry | On enquiry | |
| ODF 96 SC/APC 4U | Optical distribution frame, 96-port SC/APC, 4U rack | OLT / transport racks | 19-inch 4U, 96 SC/APC adaptors, sliding drawer | On enquiry | On enquiry | |
| PLC 1:16 SC/APC | PLC splitter 1:16, SC/APC connectorised | GPON ODN, FAT / FDT | 1 × 16, 2.0 mm SC/APC pigtails, ≤ 13.7 dB | On enquiry | On enquiry | |
| PLC 1:2 BARE | PLC splitter 1:2, bare fibre, mini steel tube | GPON ODN | 1 × 2, 250 µm / 900 µm leads, 1260–1650 nm, ≤ 4.0 dB | On enquiry | On enquiry | |
| PLC 1:32 1U RACK | PLC splitter 1:32, 1U rack-mount, SC/APC | 19-inch OLT rack | 1 × 32 in 1U 19-inch enclosure, SC/APC adaptors | On enquiry | On enquiry | |
| PLC 1:32 SC/APC | PLC splitter 1:32, SC/APC connectorised | GPON ODN, FDT / cabinet | 1 × 32, 2.0 mm SC/APC pigtails, ≤ 17.0 dB | On enquiry | On enquiry | |
| PLC 1:4 BARE | PLC splitter 1:4, bare fibre, mini steel tube | GPON ODN | 1 × 4, 1260–1650 nm, ≤ 7.2 dB | On enquiry | On enquiry | |
| PLC 1:64 SC/APC | PLC splitter 1:64, SC/APC connectorised | GPON ODN, cabinet | 1 × 64, 2.0 mm SC/APC pigtails, ≤ 20.5 dB | On enquiry | On enquiry | |
| PLC 1:8 LGX | PLC splitter 1:8, LGX cassette, SC/APC | 19-inch ODF / OLT rack | 1 × 8 in LGX module, SC/APC adaptors (1:16 and 1:32 LGX on request) | On enquiry | On enquiry | |
| PLC 1:8 SC/APC | PLC splitter 1:8, SC/APC connectorised | GPON ODN, FAT / FDT | 1 × 8, 2.0 mm SC/APC pigtails, ≤ 10.5 dB (bare and LGX variants on request) | On enquiry | On enquiry | |
| SC/APC PIGTAIL SM 1.5M | Singlemode pigtail, SC/APC, 1.5 m, 12-colour set | ODF / splice trays | G.657A1 SM, 0.9 mm tight buffer, 12 colours per set | On enquiry | On enquiry | |
| SC/APC-LC/UPC SM SX 3M | Singlemode patch cord, SC/APC – LC/UPC, simplex, 3 m | OLT / ODF to ONT | G.657A1 SM, 2.0 mm LSZH, simplex (other lengths on request) | On enquiry | On enquiry | |
| SC/APC-SC/APC SM SX 3M | Singlemode patch cord, SC/APC – SC/APC, simplex, 3 m | GPON / FTTH | G.657A1 SM, 2.0 mm LSZH, simplex (1 m, 2 m, 5 m, 10 m, 15 m on request) | On enquiry | On enquiry | |
| SC/UPC-SC/UPC SM DX 3M | Singlemode patch cord, SC/UPC – SC/UPC, duplex, 3 m | Transport / transmission | G.652D SM, 2.0 mm LSZH, duplex (other lengths on request) | On enquiry | On enquiry |
Cannot find a part number? Send us the number and we will identify and price it.
Ordering notes
For patch cords and pigtails state connector types, polish (APC or UPC), fibre grade, simplex or duplex, jacket diameter, length and quantity. For splitters give the ratio, the packaging and the connector type on the outputs. For terminals and closures give the fibre count, the mounting and the ingress rating you need. For cable give fibre count, construction (ADSS, duct, armoured, drop) and drum length. Tell us the project quantity and delivery schedule, because passive fibre is priced by volume and shipped by sea where the timeline allows. Condition is stated per quotation — new, new-surplus or refurbished — and where a destination does not admit used network equipment (Algeria is the usual example) we quote new. Hardware only: software licensing remains between the buyer and the manufacturer. Destination type approval and import permits (CST/SABER, TDRA, ICASA, CA, CMC, ARPCE) are the buyer's responsibility and we will say so on the quotation.
Lifecycle and availability
All items on this page are current production and are sourced new from qualified manufacturers to IEC and Telcordia specifications. Lead times are typically two to six weeks for project quantities, shorter for samples.
Equipment condition
New — factory-sealed, supplied through the manufacturer's own channel or a qualified distributor, with full manufacturer warranty.
New surplus — unused factory stock, original packaging where available, sourced from decommissioned projects or distributor inventory. Manufacturer warranty may have lapsed; CRS PLUS warranty applies.
Refurbished / tested — previously deployed equipment, cleaned, firmware-checked and functionally tested against the manufacturer's specification before shipment. CRS PLUS warranty applies.
Condition is confirmed in writing on every quotation before you commit to an order.
Warranty
Warranty terms vary by item, by condition and by the supplier the equipment is sourced from. They are stated in writing on the quotation, per line item, before you commit to an order.
Where equipment is supplied new through the manufacturer's own channel, the manufacturer's warranty applies and is passed to you.
Send us the part numbers you need and we will confirm warranty terms alongside availability, condition, lead time and price.
Questions
Frequently asked questions
Do you supply branded passive fibre, or generic?
Generic to specification is the default and is what most projects tender for. Where a project specifies a brand — Corning, CommScope, Fujikura, YOFC — we source that brand and say so on the quotation.
Can you provide samples before a bulk order?
Yes. Samples of patch cords, splitters and terminals can be supplied for approval, usually within two weeks, and we recommend it for any item going into a tender-controlled project.
SC/APC or SC/UPC for GPON?
SC/APC. GPON optical budgets assume angled-polish connectors and the reflections from a UPC connector on a PON will cause problems. Use UPC only on point-to-point links and SFP ports.
Do you supply installation tools and test equipment?
On request — fusion splicers, OTDRs, power meters and cleavers can be included with a project order. Tell us at enquiry stage.
Related pages
Manufacturer names, product names and part numbers are the property of their respective owners and are used here for identification purposes only. CRS PLUS sources these products through its qualified supplier base and holds no distributor, reseller or agency appointment from any manufacturer listed.
This catalogue is compiled from our supplier network's available inventory and from manufacturer product documentation, and is reviewed monthly. Listing does not indicate stock held by CRS PLUS — availability, condition and lead time are confirmed per enquiry. Last reviewed: 22 August 2026.
Need a part number from Cables, Connectors & Fibre?
A structured offer follows within 72 hours.