Huawei · Microwave & Transmission
Huawei OptiX RTN 905 2F — split-mount microwave IDU
- Part number
- RTN 905 2FModel OptiX RTN 905 2F
- Manufacturer
- Huawei
The RTN 905 2F is the indoor half of a split-mount IP microwave link — it handles service multiplexing, IF processing, system control and communications, and connects to an outdoor unit at the antenna over IF cable. The 2F is the two-link, 10GE-capable member of the RTN 905 family.
Specifications
| Platform | Huawei OptiX RTN 900 series split-mount microwave | Corroborated |
|---|---|---|
| Form factor | 1U chassis | Single source |
| Links supported | Two (the “2F” designation) | Single source |
| Interfaces | Up to 4 × 10GE, 6 × GE, 2 × STM-1, 16 × E1; IF cable to each ODU | Single source |
| Modulation | Up to 8192QAM, 112 MHz channel bandwidth | Single source |
| ODU compatibility | Huawei RTN outdoor units including the XMC series, one ODU per link | Corroborated |
Source: Huawei product pages and distributor specification tables. Several figures rest on a single source — see confidence markers.
Before you order
The three RTN 905 variants are not interchangeable. An IDU alone is not a working link — an ODU and antenna are required. Confirm the software load the customer’s network management system expects.
Variants and related part numbers
RTN 905 1ESingle link
RTN 905 2ETwo links, XPIC capable
RTN 905 2FTwo links, 10GE capable (this part)
Equipment condition
New — factory-sealed, supplied through the manufacturer's own channel or a qualified distributor, with full manufacturer warranty.
New surplus — unused factory stock, original packaging where available, sourced from decommissioned projects or distributor inventory. Manufacturer warranty may have lapsed; CRS PLUS warranty applies.
Refurbished / tested — previously deployed equipment, cleaned, firmware-checked and functionally tested against the manufacturer's specification before shipment. CRS PLUS warranty applies.
Condition is confirmed in writing on every quotation before you commit to an order.
Warranty
Warranty terms vary by item, by condition and by the supplier the equipment is sourced from. They are stated in writing on the quotation, per line item, before you commit to an order.
Where equipment is supplied new through the manufacturer's own channel, the manufacturer's warranty applies and is passed to you.
Send us the part numbers you need and we will confirm warranty terms alongside availability, condition, lead time and price.
Related pages
Manufacturer names, product names and part numbers are the property of their respective owners and are used here for identification purposes only. CRS PLUS sources these products through its qualified supplier base and holds no distributor, reseller or agency appointment from any manufacturer listed.
Request a quotation for RTN 905 2F
A structured offer follows within 72 hours.