Huawei · Antennas, GPS & GNSS

Huawei RET actuators and antenna combiners

Huawei's antenna line devices are usually bought alongside Huawei radio equipment to share one antenna feed across bands without adding a second run up the tower. The combiner range — ACOM-prefixed parts — is the item most often requested, since it is the part that fails or needs adding when a site gains a band. Huawei's newer antennas mostly integrate the RET actuator into the antenna itself rather than selling it as a separate part, so our actuator listing here is intentionally short.

How to read these part numbers

ACOM part numbers encode band count and class: ACOMD2 is dual-band, ACOMQ2 is quad-band, followed by a band-position letter (A, H, L, S) and a revision suffix. DC-bypass, stated per line, tells you which ports pass remote-tilt DC power through the combiner to the antenna — get this wrong and the RET actuator on the far side loses power even though the RF path works fine.

Equipment reference

10 of 10 items

4070097

Model
AISG COM. CABLE
Compatibility
Huawei RF antenna line devices
Band / Interface
On enquiry
Condition
On enquiry
Lead Time
On enquiry

ACOMD2A00v06

Model
Dual-band combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
1710-1755/2110-2155MHz + 1850-1995MHz, 300W, all-DC-bypass
Condition
On enquiry
Lead Time
On enquiry

ACOMD2H00v06

Model
Dual-band combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
698-960MHz + 1710-2700MHz, 300W, 1710-2700MHz DC-bypass
Condition
On enquiry
Lead Time
On enquiry

ACOMD2H06

Also: ACOMD2H06/08

Model
Dual-band combiner (TMA-combiner)
Compatibility
Huawei RF antenna line devices
Band / Interface
1710-1880/1920-2200MHz dual-band combiner
Condition
On enquiry
Lead Time
On enquiry

ACOMD2H22v06

Model
Dual-band combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
698-960MHz + 1710-2700MHz, 300W, all DC-bypass
Condition
On enquiry
Lead Time
On enquiry

ACOMD2L08v06

Model
Dual-band combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
690-803MHz + 824-960MHz, 300W, 690-803MHz DC-bypass
Condition
On enquiry
Lead Time
On enquiry

ACOMD2S02v06

Model
Dual-band smart combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
1427-1880MHz + 1920-2200MHz, 200W, smart type
Condition
On enquiry
Lead Time
On enquiry

ACOMQ2A01v06

Model
Quad-band combiner
Compatibility
Huawei RF antenna line devices
Band / Interface
690-960/1710-1880/1920-2200/2300-2690MHz, 300W, all DC-bypass
Condition
On enquiry
Lead Time
On enquiry

APE4518R17V06

Model
EasyRET 8-Port Antenna
Compatibility
Huawei RF antenna line devices
Band / Interface
On enquiry
Condition
On enquiry
Lead Time
On enquiry

ARCU02004

Model
RCU136 antenna remote control unit
Compatibility
Huawei RF antenna line devices
Band / Interface
AISG 2.0 RET actuator/RCU, 10-30V DC input
Condition
On enquiry
Lead Time
On enquiry

Cannot find a part number? Send us the number and we will identify and price it.

Ordering notes

State which bands you are combining and confirm DC-bypass requirements against your antenna's RET powering — if the combiner does not pass DC on the port your actuator needs, the antenna will pass signal but the tilt motor will not respond. Condition is stated per quotation — new, new-surplus or refurbished — and where a destination does not admit used network equipment (Algeria is the usual example) we quote new. Hardware only: software licensing remains between the buyer and the manufacturer. Destination type approval and import permits (CST/SABER, TDRA, ICASA, CA, CMC, ARPCE) are the buyer's responsibility and we will say so on the quotation.

Lifecycle and availability

Current ACOM combiner variants remain in production; ARCU02004 and earlier Huawei RET actuator stock is supplied refurbished where requested, since Huawei's current antenna generation mostly integrates the actuator rather than selling it separately. CRS PLUS is an independent broker and is not an authorised Huawei partner.

Equipment condition

New — factory-sealed, supplied through the manufacturer's authorised channel or an authorised distributor, with full manufacturer warranty.

New surplus — unused factory stock, original packaging where available, sourced from decommissioned projects or distributor inventory. Manufacturer warranty may have lapsed; CRS PLUS warranty applies.

Refurbished / tested — previously deployed equipment, cleaned, firmware-checked and functionally tested against the manufacturer's specification before shipment. CRS PLUS warranty applies.

Condition is confirmed in writing on every quotation before you commit to an order.

Warranty

Warranty terms vary by item, by condition and by the supplier the equipment is sourced from. They are stated in writing on the quotation, per line item, before you commit to an order.

Where equipment is supplied new through an authorised channel, the manufacturer's warranty applies and is passed to you.

Send us the part numbers you need and we will confirm warranty terms alongside availability, condition, lead time and price.

Frequently asked questions

Huawei's current EasyRET antenna generation builds the actuator into the antenna rather than selling a separate part, so ARCU02004 (used with earlier antenna generations) is the standalone unit we can confirm a part number for. Tell us your antenna model and we will confirm whether it needs a separate actuator at all.

Related pages

Manufacturer names, product names and part numbers are the property of their respective owners and are used here for identification purposes only. CRS PLUS sources these products through its verified supplier network and is not an authorised distributor or agent for any manufacturer listed.

This catalogue is compiled from our supplier network's available inventory and from manufacturer product documentation, and is reviewed monthly. Listing does not indicate stock held by CRS PLUS — availability, condition and lead time are confirmed per enquiry. Last reviewed: 22 August 2026.

Need a part number from this category?

Send us the part number and we will identify, confirm condition and price it — within 72 hours.

Submit an RFQ